| TECHNICAL DATA: | There are 3 different models available | |||
| Temperature range | up to 300°C with heat transfer oil TOOL-THERM SH-3 | |||
| Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|||
| Flow control | electronically, with digital display and automatic control of the minimum flow. | |||
| Heating capacity Switchable in stages |
72 kW 16 / 16 / 16 / 8 / 8 / 8 |
120 kW on request |
144 kW 32 / 32 / 32 / 16 / 16 / 16 |
|
| Cooling capacity | approx. 600 kW – see diagram cooling capacity | |||
| Pump capacity Pressure mode |
motor 7,5 kW max. 4 bar / approx. 200 – 500 l/min – see diagram pump capacity |
|||
| Expansion tank capacity | 130 litres | 130 litres | 130 litres | |
| Filling Amount | 100 litres | 200 litres | 200 litres | |
| Expansion volume | 100 litres | 100 litres | 100 litres | |
| Frequency inverter for regulation of pressure | yes | yes | yes | |
| Connections Oil circuit Cooling water |
Flange connection DN 50 flange-outside Ø 165 mm, with 4 holes Ø 18 mm on a screw hole circle of 125 mm recommended sealing: 100 x 60 x 2 mm 1 1/2″ BSP female thread (required water pressure 1.5 – 4 bar) |
|||
| Dimensions (L×W×H) | 2’150 × 1’300 × 1’950 mm | |||
| Weight (empty) | approx. 1’100 kg | approx. 1’270 kg | approx. 1’270 kg | |
| Colour | silvergrey RAL 7001 | |||
Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)
All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.
There are no reviews yet.