TECHNICAL DATA: | TT-288 | TT-288/2 | ||
Temperature range | up to 250°C with heat transfer oil TOOL-THERM SH-3 | |||
Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|||
Flow control | electronically, with digital display and automatic control of the minimum flow. | |||
Heating capacity Switchable in stages |
8 kW 3 / 5 |
2 x 8 kW 2 x 3 / 5 |
||
Cooling capacity | 60 kW at 250°C circulating temperature |
2 x 60 kW | ||
Pump capacity Pressure mode Vacuum mode Model Z |
motor 1,8 kW max. 5,5 bar / max. 100 l/min vacuum max. 8 mH2O pump with axial face seal and triple bearing system |
|||
Temperature measurement at the mould | yes | yes | ||
Leakstopper and mould drain | yes | yes | ||
Expansion tank capacity | 14 litres | 1 x 46 litres | ||
Filling Amount | 9 litres | 1 x 30 litres | ||
Expansion volume | 11 litres | 1 x 36 litres | ||
Connections Oil circuit Cooling water |
3/4″ BSP female thread inlet water filter 1″ BSP female thread outlet non-return valve 1″ BSP female thread |
|||
Dimensions (L×W×H) | 1’130 × 390 × 1’070 mm | 1’240 × 720 × 1’400 mm (incl. castors) | ||
Weight | approx. 150 kg empty | approx. 325 kg empty | ||
Colour | silvergrey RAL 7001 |
Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)
All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.
There are no reviews yet.