TECHNICAL DATA: | TT-390/2 Z or A | TT-390/2 Z or A | ||
Temperature range | up to 360°C with heat transfer oil TOOL-THERM SH-3 | |||
Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|||
Flow control | electronically, with digital display and automatic control of the minimum flow. | |||
Heating capacity Switchable in stages |
2 x 16 kW 2 x 8 / 8 |
2 x 24 kW 2 x 8 / 16 |
||
Cooling capacity | 90 kW at 360°C circulating temperature | |||
Pump capacity Pressure mode Vacuum mode Model Z |
motor 1,8 kW max. 5,5 bar / max. 100 l/min vacuum max. 8 mH2O pump with axial face seal and triple bearing system |
|||
Temperature measurement at the mould | yes | yes | ||
Leakstopper and mould drain | yes | yes | ||
Expansion tank capacity | 1 x 46 litres | 1 x 46 litres | ||
Filling Amount | 1 x 30 litres | 1 x 42 litres | ||
Expansion volume | 1 x 36 litres | 1 x 36 litres | ||
Connections Oil circuit Cooling water |
3/4″ BSP female thread 1“ BSP male thread inlet water filter 1“ BSP female thread outlet 1“ BSP female thread |
|||
Dimensions (L×W×H) | 1‘240 × 720 × 1‘400 mm, incl. castors | |||
Weight | approx. 335 kg empty | approx. 375 kg empty | ||
Colour | silvergrey RAL 7001 |
Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)
All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.
There are no reviews yet.