| TECHNICAL DATA: | ||||
| Temperature range | up to 200°C with heat transfer oil TOOL-THERM SH-3 | |||
| Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|||
| Flow control | electronically, with digital display and automatic control of the minimum flow. | |||
| Heating capacity | 8 kW | |||
| Cooling capacity | approx. 20 kW at 200°C circulating temperature | |||
| Pump capacity Pressure mode Vacuum mode |
motor 1,8 kW max. 5,5 bar / max. 100 l/min vacuum max. 8 mH2O |
|||
| Temperature measurement at the mould | yes | |||
| Leakstopper and mould drain | yes | |||
| Expansion tank capacity | 8 litres | |||
| Filling amount | 8 litres | |||
| Expansion volume | 6 litres | |||
| Connections Oil circuit Cooling water |
3/4″ BSP female thread inlet: water filter 1/2″ BSP female thread outlet: 1/2″ BSP female thread |
|||
| Dimensions (L×W×H) | 880 × 360 × 920 mm, incl. castors | |||
| Weight | approx. 120 kg empty | |||
| Colour | silvergrey RAL 7001 | |||
Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)
All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.
There are no reviews yet.