TT-388 (32 & 48KW)

Temperature Control Unit
High temperature oil unit for temperature up to 360°C
Heating capacity: 32 kW or 48 kW

Operational use:
Moulds in the die casting industry, small rollers and plates

Model Z    pump with axial face seal
Model A    pump with seal less magnetic drive

TECHNICAL DATA: TT-388 Z or A (32 kW) TT-388 Z or A (48 kW)
Temperature range up to 360°C with heat transfer oil TOOL-THERM SH-3
Temperature control self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value.
Automatic temperature monitoring.
Flow control electronically, with digital display and automatic control of the minimum flow.
Heating capacity
Switchable in stages
32 kW
8 / 24
48 kW
8 / 8 / 16 / 16
Cooling capacity 150 kW at 360° 230 kW at 360°
Pump capacity
Pressure mode
Vacuum mode

Model Z
Model A

motor 1,8 kW
max. 5,5 bar / max. 100 l/min
vacuum max. 8 mH2O

pump with axial face seal and triple bearing system
pump with seal less magnetic drive

Temperature measurement at the mould yes no
Leakstopper and mould drain yes no
Expansion tank capacity 46 litres 46 litres
Filling Amount 27 litres 70 litres
Expansion volume 36 litres 36 litres
Connections
Oil circuit
Cooling water
3/4″ BSP female thread
inlet     water filter
outlet   non-return valve
1“ BSP male thread
1“ BSP female thread
1“ BSP female thread
Dimensions (L×W×H) 1‘240 × 480 × 1‘500 mm 1‘240 × 720 × 1‘500 mm (incl. castors)
Weight approx. 235 kg empty approx. 335 kg empty
Colour silvergrey RAL 7001


Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.

There are no reviews yet.

Be the first to review “TT-388 (32 & 48KW)”