TECHNICAL DATA: | hot oil circuit | cold oil circuit | |||
Temperature range | up to 300°C | up to 80°C | |||
Temperature control | 2 self-optimizing, electronic microprocessor controllers MP-888 with digital display of the set and actual value. | ||||
Flow control | electronically, with digital display and automatic control of the minimum flow. | ||||
Heating capacity Switchable in stages |
24 kW 8 / 16 / 24 |
||||
Cooling | plate heat exchanger | ||||
Pump capacity Pressure mode |
motor 1,8 kW max. 5,5 bar / max. 100 l/min. |
motor 1,8 kW max. 5,5 bar / max. 100 l/min. |
|||
Filling amount | approx. 50 litres | approx. 50 litres | |||
Expansion tank | built-in the unit, volume 96 litres | ||||
Connections Oil circuit Cooling water |
3/4” BSP female thread 3/4” BSP female thread |
||||
Dimensions | 1’710 × 790 × 1’540 mm, incl. castors | ||||
Weight | approx. 540 kg empty | ||||
Colour | silvergrey RAL 7001 |
TT-608 Z
TT-608 Z
Heating and Cooling Unit
constructed for tools (laboratory, injection moulding)
suitable for permanent temperature up to maximum +300°C
equipped with a closed hot and cold oil cicuit with integral cold oil receiver in a large dimensioned expansion tank
constructed for tools (laboratory, injection moulding)
suitable for permanent temperature up to maximum +300°C
equipped with a closed hot and cold oil cicuit with integral cold oil receiver in a large dimensioned expansion tank
There are no reviews yet.