TT-137

Temperature Control Unit
Universally pressurised water unit with high cooling capacity

Operational use:

Model N with water up to 140°C pump with axial face seal
Model B/BP with water up to 160°C pump with seal less magnetic drive

TECHNICAL DATA: TT-137 N TT-137 B/BP
Temperature range up to 140°C up to 160°C
Temperature control Self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value.
Automatic temperature monitoring.
Heating capacity
Switchable in stages
12 kW
6 / 6
12 kW
6 / 6
Cooling capacity
Indirect
Direct
approx. 90 kW at 160°C
approx. 60 kW at 50°C
Pump capacity
Pressure mode
Vacuum mode
Model
motor 1,8 kW
max. 5 bar / max. 110 l/min.
vacuum max. 8 mH2O
axial face seal
motor 1,8 kW
max. 6,5 bar / max 75 l/min
vacuum max. 8 mH2O
seal less magnetic drive
Pressure increasing pump no yes
Temperature measurement at the mould yes yes
Pressure discharge yes yes
Leakstopper and mould drain with compressed-air with compressed-air
Filling automatic automatic
Connections
Medium
Cooling water
Compressed-air
3/4″ BSP female thread
3/8″ BSP male thread, inlet with water filter 3/8″ BSP female thread
1/4″ BSP female thread
Dimensions (LxWxH) 870 × 360 × 915 mm, incl. castors
Weight approx. 120 kg empty
Colour silvergrey RAL 7001


Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F

There are no reviews yet.

Be the first to review “TT-137”