TECHNICAL DATA: | ||||
Temperature range | up to 300°C with heat transfer oil TOOL-THERM SH-3 | |||
Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|||
Flow control | electronically, with digital display and automatic control of the minimum flow. | |||
Heating capacity | 12 kW | |||
Cooling capacity | approx. 130 kW at 290°C circulating temperature | |||
Pump capacity Pressure mode Vacuum mode Model Z |
motor 1,8 kW max. 5,5 bar / max. 100 l/min vacuum max. 8 mH2O pump with axial face seal and triple bearing system |
|||
Temperature measurement at the mould | yes | |||
Leakstopper and mould drain | yes | |||
Expansion tank capacity | 21 litres | |||
Filling Amount | 9 litres | |||
Expansion volume | 17 litres | |||
Connections Oil circuit Cooling water |
3/4″ BSP female thread inlet water filter 3/4″ BSP female thread outlet non-return valve 3/4″ BSP female thread |
|||
Dimensions (L×W×H) | 1’130 × 390 × 995 mm, incl. castors | |||
Weight | approx. 150 kg empty | |||
Colour | silvergrey RAL 7001, front RAL 7016 |
Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)
All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.
There are no reviews yet.