TT-168

Temperature Control Unit
Powerful temperature control unit for exigent injection moulders

Operational use:

TT-168 E, TT-168 H with water
with oil
up to 90°C
up to 150°C
mould weight
mould weight
up to 1’200 kg
up to   600 kg
TT-168 E/A, TT-168 H/A with water up to 90°C mould weight up to 1’800 kg
TECHNICAL DATA: There are 4 different models available
TT-168 E TT-168 H TT-168 E/A TT-168 H/A
Temperature range
Water
Oil
up to 90°C
up to 150°C
up to 90°C
up to 150°C
up to 90°C
up to 90°C
Temperature control self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value.
Automatic temperature monitoring.
Heating capacity (water)
Switchable in stages
12 kW
3 / 9
12 kW
3 / 9
18 kW
9 / 9
18 kW
9 / 9
Heating capacity (oil)
Switchable in stages
6 kW
3 / 3
6 kW
3 / 3
not suitable for oil operation
Cooling capacity 45 kW at 90°C – see diagram
Pump capacity
Pressure mode
motor 0,75 kW
max. 4,5 bar
max. 75 l/min
1,5 kW
max. 8,0 bar
max. 75 l/min
0,75 kW
max. 4,5 bar
max. 75 l/min
1,5 kW
max. 8,0 bar
max. 75 l/min
Vacuum mode vacuum max. 8 mH2O
Filling amount min. 16 litres, max. 20 litres
Connections
Medium
Cooling Water
1/2″ BSP female thread
3/8″ BSP male thread, inlet with water filter 3/8″ BSP female thread
Dimensions (L×W×H) 710 × 325 × 785 mm, incl. castors and handles
Weight approx. 67 kg empty
Colour silvergrey RAL 7001

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz. The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.

There are no reviews yet.

Be the first to review “TT-168”