Key Features
Maguire progressive cavity drum pumps meter colors from 30- or 55-gal. (135- to 230-liter) drums in a smooth, non-pulsating action, achieving pressures of 200 to 300 psi (1380 to 2070 kPa).
Controller
- The controller ensures a high degree of metering accuracy by sensing variations in screw movement during the injection molding cycle.
- Adjust metering rate to maintain uniform color delivery.
Progressive Cavity Pump
- The progressive cavity drum pump meters liquid color by positive displacement.
Automatic Speed Control
- Accuracy is achieved by controlling the exact degree of rotation of the drive motor, delivering precision coloring during each cycle.
Positive Displacement
- The pump consists of a single helix steel screw (rotor).
- As the rotor rotates, liquid is drawn into one end, expelling it out the other end, producing a positive displacement pumping action.
Applications for Molding and Extrusion Modes
Injection Molding
- Precise metering.
- Dosing uniformly over the entire screw return cycle.
- When preset count is reached, the motor automatically switches off to ensure no excess colorant is metered.
- Motor speed is precisely held regardless of changing torque requirements.
Extrusion Following Mode
- The drum pump follows the speed of the extruder automatically.
- Accurate dosing.
- Changes to the extruder are reflected in the output of the drum pump.
- A tachometer provides AC or DC voltage output from the extruder to the pump to enable the drum pump to match the extruder as speed ramp up or down.
MDA Pump at a Glance
1. Non-Pulsating Action
Accurately meter colors from 30 – 55 gal. (135 – 230 liter) drums, in a smooth non-pulsating action.
3. Positive Displacement
As the rotor rotates, liquid is drawn into one end, expelling it out the other end, producing a positive displacement pumping action.

2. For All Applications
Consistent metering for Molding and Extrusion applications.
4. Automatic Speed Control
Accuracy is achieved by controlling the exact degree of rotation of the drive motor, delivering precision coloring during each cycle.
Options
Option | Model | Description | |
Drum Pump lances with motor | MDA-6-18, MDA-8-50, MDA-10-50 MDA-15-50, MDA-20-50 | Option of lances from 6 lb to 20 lb lances and motors from 18RPM up to 50RPM | |
Extrusion Following Control | MDA-6-18, MDA-8-50, MDA-10-50 MDA-15-50, MDA-20-50 | Add extrusion following mode to controls | |
Spare controller | MDA-6-18, MDA-8-50, MDA-10-50 MDA-15-50, MDA-20-50 | Back up controller for MPD Pump from 9RPM up to 94RM motor |
There are no reviews yet.